5962-8772201CA代理TIIC优势订货 产地货源 价格优惠

The TMP/ SMJ320C40KGD DSP is a 32-bit, floating-point processor manufactured in 0.72-um, double-level metal CMOS technology. It is the fourth generation of DSPs from Texas Instruments, and it is the world\x92s first DSP designed for parallel processing. The on-chip parallel processing capabilities of the \x92C40 make the floating-point performance required by many applications achievable and cost-effective.
TMP/SMJ320C40KGD是一款采用0.72um双层金属CMOS工艺制造的32位浮点处理器。它是德州仪器的*四代数字信号处理器，也是世界上个设计用于并行处理的数字信号处理器。x92C40的片上并行处理能力使许多应用程序所需的浮点性能得以实现并具有成本效益。
The TMP/ SMJ320C40 is the first DSP with on-chip communication ports for processor-to-processor communication using simple communication software with no external hardware. This allows connectivity with no external glue logic. The communication ports remove I/O bottlenecks, and the independent smart-DMA coprocessor is able to handle the CPU I/O requirements.
TMP/SMJ320C40是个具有片上通信端口的DSP，它使用简单的通信软件进行处理器间的通信，而*外部硬件。这允许在没有外部粘合逻辑的情况下进行连接。通信端口消除了I/O瓶颈，独立的智能DMA协处理器能够处理CPU的I/O需求。

5962R8773901VCA的中英文资料
PM139有四个独立的电压比较器,精密直流规格。低偏移电压、偏置电流、功率消耗和输出饱和电压提供单电源操作的设计特性。输入电压范围包括地面为单一供应方便操作。马2电源电流,独立于电源电压,再加上单一供应操作,使得这个比较适合低功耗应用程序。集电极开路输出允许应用程序的灵活性。
5962R8773901VCA的特征
单或双供应操作
　　输入电压范围包括地面
　　低功耗
　　低输入偏置电流
　　低输入偏置电流
　　低偏置电压
　　低饱和输出电压
　　发射较耦合逻辑,逻辑输出与TTL兼容,迪泰金属氧化物半导体和CMOS

AD571-000C的中英文资料
AD571是10位逐次逼近组成的A / D转换器DAC,参考电压,时钟,比较器,逐次逼近寄存器和输出缓冲区,所有在一个芯片上制作的。不需要任何外部组件来执行一个完整的准确性在40μs 10位转换。
操作供应+ 5 V + 15 V和-15 V,AD571将接受模拟输入0 V + 10 V单较±5双,外部可选择的。当空白和转换输入驱动的低,这三个国家输出将和一个转换将开始开放。数据准备完成后,直线低和梨的数据输出。把空白和转换输入空格输出高,决心下一版本的设备。AD571执行真正的10位码40μs转换没有失踪。
AD571可用的两个版本0°C + 70°C的温度范围,AD571J和k AD571S担保10位精度,没有失踪从-55°C + 12码
The AD571 is an 10-bit successive approximation A/D converter consisting of a DAC, voltage reference, clock, comparator, successive approximation register and output buffers--all fabricated on a single chip. No external components are required to perform a full accuracy 10-bit conversion in 40 μs.
Operating on supplies of +5 V to +15 V and -15 V, the AD571 will accepts analog inputs of 0 V to +10 V unipolar of ±5 V bipolar, externally selectable. When the BLANK and CONVERT input is driven low, the three state outputs will be open and a conversion will commence. Upon completion of the the DATA READY line goes low and the data pears at the output. Pulling the BLANK and CONVERT input high blanks the outputs and readies the device for the next version. The AD571 executes a true 10-bit conversion with no missing codes in 40 μs maximum.
The AD571 is available in two versions for the 0°C to +70°C temperature range, the AD571J and K. The AD571S guarantees 10-bit accuracy and no missing codes from -55°C to +125°C.
PRODUCT HIGHLIGHTS
The AD571 is a complete 10-bit A/D converter. No external components are required to perform a conversion. Full-scale calibration accuracy of ± 0.3% is achieved without external trims.
The AD571 is a single chip device employing the most advanced IC processing techniques. Thus, the user has at his disposal a truly precision component with the reliability and low cost inherent in monolithic construction.
The AD571 accepts either unipolar (0 V to +10 V) or bipolar (–5 V to +5 V) analog inputs by grounding or opening a single pin.
The device offers true 10-bit accuracy and exhibits no missing codes over its entire operating temperature range.
Operation is guaranteed with –15 V and +5 V or +15 V supplies. The device will also operate with a –12 V supply.
AD571-000C的参数特征
完成A / D转换器和参考时钟
　　快速连续的近似转换:40μs
　　数字多路复用:
　　三态输出
　　18-Pin陶瓷泡
　　温度没有缺失的代码
　　0°C + 70°C:AD571K
　　-55°C + 125°C:AD571S
　　低成本的整体结构